The firmware recovery program allows loading the firmware image only to the devices in the local segment and turned into the rescue mode where the boot loader works. The idea of this scheme is to exclude a certain LAN-port from the switching engine and use it specifically to connect to the operator. Our attempt was a success. The DSL-G31 wireless network allows wireless clients to connect using One of such needs may be the necessity to connect to Ethernet providers. Notify me of follow-up comments. We hope that these connection types will appear among available WAN connection types in further firmware versions as when the article was being written the functions of connecting to Ethernet providers were in beta-testing.

Uploader: Meztizragore
Date Added: 19 October 2004
File Size: 18.49 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 86774
Price: Free* [*Free Regsitration Required]

Hit return at prompt if parameter is not used. Testing Traditionally we start the testing section with determining the booting time of the equipment in question.

On the bottom there are also vent holes and a sticker with the brief information about the device. Do you still have questions concerning the router that you can’t find online? In the LAN group on the Route tab you can add static routes, but we failed to make them work. The recovery process is very simple: We also decided to measure the temperature of the router surface while it was in operation.

  INTEL ICH9R DRIVER

We concentrated on the wireless part of DSL-G31 dt-g31 its work as a regular router in Ethernet networks. The diagram of the chips under consideration is shown below.

To upgrade via web-interface you have to open the Firmware upgrade tab in the Administration menu. Altogether we found six open ports: Log data can be stored either locally or on a remote Syslog server. Generally, all commands available in the command line may be run from the menu; xsus still preferred not to display the menu points.

Asus WL-600g User Manual

Altogether we rt-t31 seven interfaces. You need JavaScript enabled to view it. After checking the availability of the boot loader we transfer the firmware image file via the TFTP protocol as described above.

You can create, look through and delete WAN-interface settings via the same-name menu point 3. From now on all unnecessary line feeds are deleted.

ASUS DSL-G31 Default Password & Login, Manuals and Reset Instructions | RouterReset

After which the telnet session is broken and two minutes later the router is ready to work again. Similar information may be got from the command sysinfo. Our attempt was a success. As we see, at the moment aus router is not heavily loaded. Notify me of follow-up comments. Firmware for this model is developing dynamically, for instance, DSL-G31 can now be used as a regular wireless router for connecting to Ethernet providers.

Each of these memory modules is of 8 Rr-g31, consequently the device can work with 16 Mbyte of RAM altogether. It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are aus resetting your router this way, instead of just rebooting it.

  LASERJET 3005DN DRIVER

If you haven’t yet changed the defaul password, we recommend that you change it first thing you do after logging in. Idle Link Power State: When the user addresses However, first things first. Four soft rubber stands are glued to the bottom to put the device on the table. You can turn ashs device in this mode manually; for this you have to press the Reset button on the back panel of the ADSL router, switch the power on and wait for the power indicator to start flashing slowly seconds.

ASUS DSL-G31 – connection to ADSL or Ethernet providers

At hand we had a 3. During the experiment we came across somewhat strange behavior of the virtual servers configured on the router.

The parameters of sending log information to the Syslog-server may be set in sub-point 2 System Log.

admin Graphic and Video Cards